How to change Lift-Off Distance (LOD)_News_Latest News

How to change Lift-Off Distance (LOD)

Sep, 24 ,2020

3262

There are three Lift-Off Distance (LOD) settings - Low (Default), Medium and High. Based on the data from our sensor tests with a variety of mousepads, we chose low as the default setting which will be between 1.0~1.2mm. This range, in our opinion, is the optimal LOD. However we understand that people have different usage habits which is why we have three adjustable settings to suit different needs.

If you don’t encounter any issues while using the mouse, there is no need to change the LOD.
However if you encounter any of the situations below, we suggest you adjust the LOD to the Medium or High setting.

Can't get used to the feeling of the default LOD.
The cursor drags when you lift the mouse.
Feel the LOD is too slow after switching to 0.6mm mouse feet.

Instructions on how to change the Lift-Off Distance:
Low (Default)

Plug out the USB connector
Hold down the buttons of Mouse 1 + Mouse 4
Continue to hold the buttons down and plug in the USB connector
On the bottom of the mouse, one of the indicator lights for Polling Rate will blink twice
The mouse is now set to the Low LOD setting.

Medium

Plug out the USB connector
Hold down the buttons of Mouse 1 + Mouse 5
Continue to hold the buttons down and plug in the USB connector
On the bottom of the mouse, two of the indicator lights for Polling Rate will blink twice
The mouse is now set to the Medium LOD setting.

High

Plug out the USB connector
Hold down the buttons of Mouse 1 + Mouse2 + Mouse 4
Continue to hold the buttons down and plug in the USB connector
On the bottom of the mouse, all three of the indicator lights for Polling Rate will blink twice
The mouse is now set to the High LOD setting.

Can't get used to the feeling of the default LOD.
The cursor drags when you lift the mouse.
Feel the LOD is too slow after switching to 0.6mm mouse feet.

Instructions on how to change the Lift-Off Distance:
Low (Default)

Plug out the USB connector
Hold down the buttons of Mouse 1 + Mouse 4
Continue to hold the buttons down and plug in the USB connector
On the bottom of the mouse, one of the indicator lights for Polling Rate will blink twice
The mouse is now set to the Low LOD setting.

Medium

Plug out the USB connector
Hold down the buttons of Mouse 1 + Mouse 5
Continue to hold the buttons down and plug in the USB connector
On the bottom of the mouse, two of the indicator lights for Polling Rate will blink twice
The mouse is now set to the Medium LOD setting.

High

Plug out the USB connector
Hold down the buttons of Mouse 1 + Mouse2 + Mouse 4
Continue to hold the buttons down and plug in the USB connector
On the bottom of the mouse, all three of the indicator lights for Polling Rate will blink twice
The mouse is now set to the High LOD setting.

Back to list

Member Forum

Leave Message

jopo_m**

2020-10-04 08:00

"we chose low as the default setting which will be between 1.0~1.2mm. "
Is it possible to tell the LOD of the medium setting ~ ?

Name	Content	Reply	Time

Extended reading

VAXEE XE Competitive Version Firmware

Feb, 03 ,2023

While working towards out goal of having wireless mice reach the same level of performance and responsiveness as wired mice, we tested many firmware versions. One of these firmware versions provided even better responsiveness than the High- Speed Mode we

VAXEE XE Wireless - Function Adjustment User Guide

Jan, 19 ,2023

Weight notes of XE Wireless

Jan, 10 ,2023

Thank you all for your continued interest in our wireless mouse products. For a company like ourselves that is just starting out, we hold gratefulness in our hearts for your support. This is why with all of our social posts or news articles, we say “Thank